View APT30M30LLL_1211582.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

APT30M30B2LL APT30M30LLL
300V 100A 0.030
POWER MOS 7
(R)
R
MOSFET
B2LL
Power MOS 7 is a new generation of low loss, high voltage, N-Channel enhancement mode power MOSFETS. Both conduction and switching (R) losses are addressed with Power MOS 7 by significantly lowering RDS(ON) (R) and Qg. Power MOS 7 combines lower conduction and switching losses along with exceptionally fast switching speeds inherent with APT's patented metal gate structure. * Lower Input Capacitance * Lower Miller Capacitance * Lower Gate Charge, Qg
MAXIMUM RATINGS
Symbol VDSS ID IDM VGS VGSM PD TJ,TSTG TL IAR EAR EAS Parameter Drain-Source Voltage Continuous Drain Current Pulsed Drain Current
1 5
T-MAXTM
TO-264
LLL
* Increased Power Dissipation * Easier To Drive * Popular T-MAXTM or TO-264 Package
D G S
All Ratings: TC = 25C unless otherwise specified.
APT30M30B2LL_LLL UNIT Volts Amps
300
@ TC = 25C
100 400 30 40 694 5.56 -55 to 150 300 100 50 3000
Gate-Source Voltage Continuous Gate-Source Voltage Transient Total Power Dissipation @ TC = 25C Linear Derating Factor Operating and Storage Junction Temperature Range Lead Temperature: 0.063" from Case for 10 Sec. Avalanche Current
1
Volts Watts W/C C Amps mJ
(Repetitive and Non-Repetitive)
1 4
Repetitive Avalanche Energy
Single Pulse Avalanche Energy
STATIC ELECTRICAL CHARACTERISTICS
Symbol BVDSS RDS(on) IDSS IGSS VGS(th) Characteristic / Test Conditions Drain-Source Breakdown Voltage (VGS = 0V, ID = 250A) Drain-Source On-State Resistance
2
MIN
TYP
MAX
UNIT Volts
300 0.030 100 500 100 3 5
(VGS = 10V, ID = 50A)
Ohms A nA Volts
7-2004 050-7153 Rev B
Zero Gate Voltage Drain Current (VDS = 300V, VGS = 0V) Zero Gate Voltage Drain Current (VDS = 240V, VGS = 0V, TC = 125C) Gate-Source Leakage Current (VGS = 30V, VDS = 0V) Gate Threshold Voltage (VDS = VGS, ID = 2.5mA)
CAUTION: These Devices are Sensitive to Electrostatic Discharge. Proper Handling Procedures Should Be Followed.
APT Website - http://www.advancedpower.com
DYNAMIC CHARACTERISTICS
Symbol Ciss Coss Crss Qg Qgs Qgd td(on) tr td(off) tf Eon Eoff Eon Eoff Characteristic Input Capacitance Output Capacitance Reverse Transfer Capacitance Total Gate Charge
3
APT30M30B2LL_LLL
Test Conditions
VGS = 0V VDS = 25V f = 1 MHz VGS = 10V VDD = 150V ID = 100A @ 25C RESISTIVE SWITCHING VGS = 15V VDD = 150V ID = 100A @ 25C RG = 0.6 7 INDUCTIVE SWITCHING @ 25C VDD = 200V, VGS = 15V ID = 100A, RG = 5 7 INDUCTIVE SWITCHING @ 125C VDD = 200V, VGS = 15V ID = 100A, RG = 5
MIN
TYP
MAX
UNIT
7030 1895 110 140 41 70 15 22 35 8 925 1345 1055 1485
MIN TYP MAX UNIT Amps Volts ns C nC pF
Gate-Source Charge Gate-Drain ("Miller") Charge Turn-on Delay Time Rise Time Turn-off Delay Time Fall Time Turn-on Switching Energy Turn-off Switching Energy Turn-on Switching Energy Turn-off Switching Energy
ns
J
SOURCE-DRAIN DIODE RATINGS AND CHARACTERISTICS
Symbol IS ISM VSD t rr Q rr
dv/ dt
Characteristic / Test Conditions Continuous Source Current (Body Diode) Pulsed Source Current Diode Forward Voltage
1 2
100 400 1.3 450 10.0 5
MIN TYP MAX
(Body Diode) (VGS = 0V, IS = -ID100A)
Reverse Recovery Time (IS = -ID100A, dl S /dt = 100A/s) Reverse Recovery Charge (IS = -ID100A, dl S/dt = 100A/s) Peak Diode Recovery
dv/ dt 6
V/ns
THERMAL CHARACTERISTICS
Symbol RJC RJA Characteristic Junction to Case Junction to Ambient UNIT C/W
0.18 40
1 Repetitive Rating: Pulse width limited by maximum junction temperature 2 Pulse Test: Pulse width < 380 s, Duty Cycle < 2% 3 See MIL-STD-750 Method 3471
APT Reserves the right to change, without notice, the specifications and inforation contained herein. 0.20
, THERMAL IMPEDANCE (C/W)
4 Starting Tj = +25C, L = 0.60mH, RG = 25, Peak IL = 100A 5 The maximum current is limited by lead temperature 6 dv/dt numbers reflect the limitations of the test circuit rather than the device itself. IS -ID100A di/dt 700A/s VR 300V TJ 150C 7 Eon includes diode reverse recovery. See figures 18, 20.
0.18 0.16 0.14 0.12 0.10 0.08 0.06 0.04 0.02 0 10-5 0.1 0.05 10-4 SINGLE PULSE 1.0 0.3 0.5 Note:
PDM t1 t2 Peak TJ = PDM x ZJC + TC Duty Factor D = t1/t2
0.9
0.7
7-2004
050-7153 Rev B
Z
JC
10-3 10-2 10-1 RECTANGULAR PULSE DURATION (SECONDS) FIGURE 1, MAXIMUM EFFECTIVE TRANSIENT THERMAL IMPEDANCE, JUNCTION-TO-CASE vs PULSE DURATION
Typical Performance Curves
RC MODEL
250
ID, DRAIN CURRENT (AMPERES)
APT30M30B2LL_LLL
VGS =15 &10V 8V
Junction temp. ( "C) 0.0271 0.00899F
200 7.5V 150 7V 100 6.5 6V 5.5V 0 5 10 15 20 25 30 VDS, DRAIN-TO-SOURCE VOLTAGE (VOLTS) FIGURE 3, LOW VOLTAGE OUTPUT CHARACTERISTICS 1.40
V
Power (Watts)
0.0656
0.0202F
0.0859 Case temperature
0.293F
50
0
FIGURE 2, TRANSIENT THERMAL IMPEDANCE MODEL
RDS(ON), DRAIN-TO-SOURCE ON RESISTANCE
250
ID, DRAIN CURRENT (AMPERES)
VDS> ID (ON) x RDS(ON) MAX. 250 SEC. PULSE TEST @ <0.5 % DUTY CYCLE
200
1.30 1.20 1.10 1.00 0.90 0.80
GS
NORMALIZED TO = 10V @ I = 50A
D
150
100
VGS=10V
50
TJ = +25C TJ = +125C TJ = -55C
VGS=20V
0
0 2 4 6 8 10 VGS, GATE-TO-SOURCE VOLTAGE (VOLTS) FIGURE 4, TRANSFER CHARACTERISTICS
0
120 100 80 60 40 20 0 25
BVDSS, DRAIN-TO-SOURCE BREAKDOWN VOLTAGE (NORMALIZED)
1.15
40 60 80 100 120 140 160 180 ID, DRAIN CURRENT (AMPERES) FIGURE 5, RDS(ON) vs DRAIN CURRENT
20
ID, DRAIN CURRENT (AMPERES)
1.10
1.05
1.00
0.95
50 75 100 125 150 TC, CASE TEMPERATURE (C) FIGURE 6, MAXIMUM DRAIN CURRENT vs CASE TEMPERATURE
RDS(ON), DRAIN-TO-SOURCE ON RESISTANCE (NORMALIZED)
0.90 -50
-25 0 25 50 75 100 125 150 TJ, JUNCTION TEMPERATURE (C) FIGURE 7, BREAKDOWN VOLTAGE vs TEMPERATURE 1.2
2.5
I V
D
= 50A = 10V
2.0
VGS(TH), THRESHOLD VOLTAGE (NORMALIZED)
GS
1.1 1.0 0.9 0.8 0.7 0.6 -50
1.5
1.0
0.5
0.0 -50
-25 0 25 50 75 100 125 150 TJ, JUNCTION TEMPERATURE (C) FIGURE 8, RDS(ON) vs. TEMPERATURE
-25 0 25 50 75 100 125 150 TC, CASE TEMPERATURE (C) FIGURE 9, THRESHOLD VOLTAGE vs TEMPERATURE
050-7153 Rev B
7-2004
400
ID, DRAIN CURRENT (AMPERES)
OPERATION HERE LIMITED BY RDS (ON)
20,000 10,000
APT30M30B2LL_LLL
Ciss
C, CAPACITANCE (pF)
100 100S
Coss 1,000
10
1mS 10mS
100
Crss
1
TC =+25C TJ =+150C SINGLE PULSE
1 10 100 300 VDS, DRAIN-TO-SOURCE VOLTAGE (VOLTS) FIGURE 10, MAXIMUM SAFE OPERATING AREA
I
D
0 10 20 30 40 50 VDS, DRAIN-TO-SOURCE VOLTAGE (VOLTS) FIGURE 11, CAPACITANCE vs DRAIN-TO-SOURCE VOLTAGE
IDR, REVERSE DRAIN CURRENT (AMPERES)
10
VGS, GATE-TO-SOURCE VOLTAGE (VOLTS)
16
300
= 100A
12
VDS=60V VDS=150V
100 TJ =+150C TJ =+25C
8
VDS=240V
10
4
50 100 150 200 250 Qg, TOTAL GATE CHARGE (nC) FIGURE 12, GATE CHARGE vs GATE-TO-SOURCE VOLTAGE 120 100
td(on) and td(off) (ns)
0
0
1 0.3 0.5 0.7 0.9 1.1 1.3 1.5 VSD, SOURCE-TO-DRAIN VOLTAGE (VOLTS) FIGURE 13, SOURCE-DRAIN DIODE FORWARD VOLTAGE 200
V
DD G
td(off)
180 160
= 200V
R
= 5
T = 125C
J
80 60 40 20 0 40
V
DD G
= 300V
140
tr and tf (ns)
L = 100H
R
= 5
120 100 80 60 40 20
tf
T = 125C
J
L = 100H
td(on)
tr
100 120 140 160 ID (A) FIGURE 14, DELAY TIMES vs CURRENT
V
DD G
60
80
100 120 140 160 ID (A) FIGURE 15, RISE AND FALL TIMES vs CURRENT 5000
V I
DD
0 40
60
80
3500
= 200V
= 200V
3000
SWITCHING ENERGY (J)
R
= 5
D J
= 100A
T = 125C
SWITCHING ENERGY (J)
J
4000
T = 125C L = 100H EON includes
2500 2000 1500 1000 500 0 40
L = 100H E ON includes diode reverse recovery.
Eoff
300
diode reverse recovery.
Eoff
2000 Eon 1000
7-2004
Eon
050-7153 Rev B
100 120 140 160 ID (A) FIGURE 16, SWITCHING ENERGY vs CURRENT
60
80
10 15 20 25 30 35 40 45 50 RG, GATE RESISTANCE (Ohms) FIGURE 17, SWITCHING ENERGY VS. GATE RESISTANCE
0
0
5
Typical Performance Curves
90% 10% Gate Voltage T 125C J
APT30M30B2LL_LLL
Gate Voltage
td(on) tr
90% Drain Current
td(off) tf
90% 10% Drain Voltage
TJ125C
5% Switching Energy
10%
5%
Drain Voltage Switching Energy
0
Drain Current
Figure 18, Turn-on Switching Waveforms and Definitions
Figure 19, Turn-off Switching Waveforms and Definitions
APT60DS30
V DD
ID
V DS
G D.U.T.
Figure 20, Inductive Switching Test Circuit
T-MAXTM (B2) Package Outline
4.69 (.185) 5.31 (.209) 1.49 (.059) 2.49 (.098) 15.49 (.610) 16.26 (.640) 5.38 (.212) 6.20 (.244)
TO-264 (L) Package Outline
4.60 (.181) 5.21 (.205) 1.80 (.071) 2.01 (.079) 19.51 (.768) 20.50 (.807) 3.10 (.122) 3.48 (.137) 5.79 (.228) 6.20 (.244)
Drain
20.80 (.819) 21.46 (.845)
Drain
25.48 (1.003) 26.49 (1.043)
4.50 (.177) Max. 0.40 (.016) 0.79 (.031)
2.87 (.113) 3.12 (.123) 1.65 (.065) 2.13 (.084) 2.29 (.090) 2.69 (.106) 19.81 (.780) 21.39 (.842)
2.29 (.090) 2.69 (.106)
19.81 (.780) 20.32 (.800)
2.21 (.087) 2.59 (.102)
5.45 (.215) BSC 2-Plcs.
These dimensions are equal to the TO-247 without the mounting hole. Dimensions in Millimeters and (Inches)
5.45 (.215) BSC 2-Plcs.
Dimensions in Millimeters and (Inches)
APT's products are covered by one or more of U.S.patents 4,895,810 5,045,903 5,089,434 5,182,234 5,019,522 5,262,336 6,503,786 5,256,583 4,748,103 5,283,202 5,231,474 5,434,095 5,528,058 and foreign patents. US and Foreign patents pending. All Rights Reserved.
050-7153 Rev B
0.48 (.019) 0.84 (.033) 2.59 (.102) 3.00 (.118)
0.76 (.030) 1.30 (.051) 2.79 (.110) 3.18 (.125)
7-2004
1.01 (.040) 1.40 (.055)
Gate Drain Source
Gate Drain Source

▲Up To Search▲

Price & Availability of APT30M30LLL

	To Download APT30M30LLL Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .